Hi K, Sorry for my late reply, I don't have much time at the moment. In your 1st post, I see a lot of curves, but I don't know what they represent. Note that receiving radio is not necessarily a sign of an efficient antenna. For example, see in the attached picture the radio spectrum between 5 and 14 MHz that I now receive with my SDR ( https://www.sdrplay.com/rspdx/) connected to a PC and a small antenna, with SDR# software. The white peaks are radio signals, the largest of which are broadcast, e.g. around 12 MHz. And the antenna is only 35 cm long and inside the house, a very bad antenna, yet you can see the signals very well. Even the smallest piece of wire can be used as a radio antenna. There are cheap ways to receive a radio spectrum, at least for frequencies >25 MHz, see https://www.rtl-sdr.com/about-rtl-sdr/. I encourage all FE researchers who handle high frequencies and want to know the spectrum of their signals and the levels, to use them, because the spectra on scopes are usually insufficient. That' s what you would need to specify the sensitivity of your antenna and whether it is really effective. Only measurements can indicate an efficient antenna.
---------------------------
"Open your mind, but not like a trash bin"
|