So the yoke based transformer is just referred to as the "yoke", and the primaries of the yoke are driven by the push pull circuit. The secondary of the yoke drives the "inductor", which is wound over the small end of the "grenade".
Should not the TC primary and secondary just be referred to as the TC primary and secondary?
PW
PW: That is correct, yet there are two yoke secondary coils. The second one (25 to 28 turns on the yoke coil) goes from the yoke to the bigger 40m long grenade output coil. And, this second yoke secondary circuit is also in series, with a small 0.15mf or so tuning capacitor. Each diagram or schematic is different. But, what I just mentioned are the standard mode of operation. Just how or why the two different circuits combine to produce OU, Is still unknown, to me. Yet, the idea is a standing wave device that interacts with the Aether, and can harvest from the surrounding ambient energies. Of course, most will disagree, as most have never seen it at work. Nor have I, but here's hoping... One more thing, about that gizmo thingy. I can tell you what it does, it intensifies the spark, or streamers, by a lot. Just how or why, I don't know. But, without it, the Kacher signal is weak. So, it helps, and can or may work even without it, as Geofusion has shown, but, not as well. On most self runners it's there. But, it's getting to be not so easy to find one of those ferrite rods, or bars, (as in my case), out of an old radio, anymore. NickZ
|
Author
Topic: Dally, Shark & Ruslan workbench (Read 310305 times)
