I believe I found it at 4 turns and lower the Litz secondary shows this:
@GK
Had unexpected visitors yesterday. I had started a post but was called away. Shnit.
OK, 4 turns. Stop. Very interesting.
1) Now what happens if those 4 turns are slid across the iron wire from pulsed side to permanent connection side of the iron ring?
2) Then what happens to the four turns when the turns are closer or further apart? Very important.
3) Then what happens if you bring an Alnico magnet near the four turns or stuck to either end of the iron wire or two magnet one on each end and changed polarity?
All these variables from that one base could teach a lot.
I finished my straight set-up and will start today with some trials. Will post.
What I had started to post yesterday......
Look at the activity on that line tracer!
http://www.youtube.com/watch?v=W7GHqw7d1No
Don repeatedly talks about the electron flipping. Spin Conveyance.
@GK
1000 times yes. I am so sure if I knew Smith and SC then and explained it too him, he would have caught on in 30 minutes. He would have had a new way to talk about his effects because everything he said seemed to fly by most attendees. He explained his effects to his best "T" but could never really touch the causes. Tesla would have caught on in 5 or 2.
When he showed Beardens Metglass coil, Metglass is what? Oriented atoms. So how are they oriented? The atoms are not but the nuclei of each atom is. The more oriented the nuclei are in a mass, the more nuclei will respond to the same stimuli. The more nuclei that respond, the more amperage is conveyed at a given voltage. Otherwise Metglass would have no advantage.
Leaves on a tree? Same thing. They figured out how to orient the heavy side to best react to the Sun pulsations during its daily motion in the sky. Your eyes see because of oriented nuclei each atom having its affinity to a certain wavelength of light. THERE ARE NO PHOTONS just as in xrays, there is no beam passing through you to hit the plate. The plate nuclei simply react to the presence of a source and the body in between muffles some of that intensity to produce the skeletal form. All backwards. Just like the Cabal like it.
In SC voltage then becomes the simple construct in degrees of nucleic sway and amperage becomes the number of nuclei swaying and conveying down the line. From that you then can take all the bases for resistance, impedance, capacitance, etc.
The same could be used for anti-gravity objects because sway includes inertia. With the right atoms, conductive but with much heavier nuclei, if oriented so the nucleic heavy side is pointing horizontal, if a pulse makes the sway of the nuclei sway upwards then return with the Earth bias, then another pulse to sway upwards again, etc., you just made an anti-gravity device. Just don't stop pulsing. Those aluminum kites that rise when energized with high voltage work in the same manner. Voltage is the degree of nucleic sway in a particular atom. Even though the aluminum are not oriented, there are enough nuclei pointing horizontally and at the right frequency bingo, off the ground. There is no playing with fields and no electrons required.
Most everything we are doing today will be looked on in xx years and people will wonder how the hell we managed all this without knowing the real cause/effect. The guys that researched and produced the vacuum tube were in my eyes the best nucleus users on the planet. They conquered the nefarious coil/core/coil coupling limit by using atoms and proximity in a way that even today our electronics cannot properly describe with electrons, without resorting to quasi religious faith based beliefs. It just works but the gained knowledge of vacuum tubes is now lost with the lives of those who had mastered them through rigorous trial and error. For those still alive, they would be a Gold Mine of material cause and effect. Imagine, the best sound systems still use vacuum tubes.
I think the IC is actually the one that stalled our progress in OU research because no one can see anything but the effect. So you take a modern day memory chip. Science says it's chock full of electrons and fields. How the hell is that possible, no one can say. But under SC it is very normal when each atom has a responsive nuclei that can act independent to the other nuclei and convey a signal, micron to micron or atoms to atoms. We are swaying nuclei but do not know it.
The thing is with SC, just using the Periodical Table of Elements and some new math that would be needed would provide experimenters with more ways to work out topologies where the nucleic angle of the heavy side would become a major factor in producing new wires, flat wires, materials, sensors, medical devices, topologies, etc. Light and sound could become fair primaries. Secondary wires could be pre-oriented in series and parallel to produce OU outputs even in the most elementary topologies.
Human ailments would be seen as unresponsive nuclei where an outside sound or light or pulse source could be used to degaus or reorient or release the body so it can return to its original base. It's all at our grasp.
I will be putting up a new SC based Periodical Table that will explain better the base of SC. I am looking to find a modern day Maxwell that could work out some math for more columns of the table and other math for producing some formulas based on nucleic heavy side and inertia. This could open up a whole new area of science.
Anyways, sorry, I know I am a ranter but sometimes I need to let out some steam, but let's move on brother.
wattsup
Author
Topic: What is Known about the TPU (Read 460765 times)
