3 Digit 7 Seg Digital Monostable

Author Topic: 3 Digit 7 Seg Digital Monostable (Read 9687 times)

Topic Options

Peterae

3 Digit 7 Seg Digital Monostable « on: 2014-09-07, 10:52:26 »

Group: Administrator
Hero Member

Posts: 3981

I am going to design a digital monostable for use in various projects.

I will use digital delay lines DS1023, these come in various flavours 250 pS, 1nS, 2nS, 5nS

i will design so the 1nS,2nS can be used.

If 1nS chips are used then the monostable will allow a pulse width of 0-512nS in steps of 1nS

if 2nS chips are used then the pulse width will be 0-999nS in steps of 2nS

I will allow this to be set in software for display purposes and then it's just a case of plugging in the chosen chip.

everything will be through hole for easy construction.

A 3 digit 7-segment display will show the set pulse width.

The value will be set using a rotary thumb encoder, a switch on the shaft can be used to store the current setting for instant power up value.

I will provide a fast ttl buffer stage for the output pulse.

Input supply voltage 7-30V, on board 5v regulator.

Anything else people require or any other suggestions and i will see what i can do.

What plug does everyone want with the output pulse to appear on BNC???

Peterae	Re: 3 Digit 7 Seg Digital Monostable « Reply #1 on: 2014-09-07, 10:55:56 »
Group: Administrator Hero Member Posts: 3981	another option would be to use 1 off 1nS & 1off 2nS chips in series to produce 0-768nS in 1nS steps, i will add this function in software. The first thing for me to do, is check they are still available at a reasonable price, they never were that easy to get but are available from Maxim. I will also check to see if other brands are available as it has been about 5 or 6 years since i used this device.

ion

Re: 3 Digit 7 Seg Digital Monostable « Reply #2 on: 2014-09-07, 14:46:11 »

Group: Elite
Hero Member

Posts: 3537
It's turtles all the way down

Peter

Looking forward to your further development of this. Maybe adding a couple of power FET sections with driver chips would also be good.

Regards, ION

---------------------------

"Secrecy, secret societies and secret groups have always been repugnant to a free and open society"......John F Kennedy

Peterae	Re: 3 Digit 7 Seg Digital Monostable « Reply #3 on: 2014-09-07, 15:17:20 »
Group: Administrator Hero Member Posts: 3981	Hi ION I can add a fet driver, so therefore we could have 0-5V out & Push/Pull 4 Amps 0-18V output. I have found the DS1123 to be more easily available and half the price so will go with this, it's exactly the same as the DS1023 but a 3.3V device, this is not a problem as my PIC will work down to 2V and i was going to use a MC74VHC1GT08 OR gate buffer which work well as logic level translators 3.3V -> 5V anyway. Output will be configurable for PWM or pulse delay so in theory 2 of these boards could be connected to phase delay and then PWM a signal. I'm working on the diagram « Last Edit: 2014-09-09, 22:27:19 by Peterae »

Peterae	Re: 3 Digit 7 Seg Digital Monostable « Reply #4 on: 2014-09-09, 22:22:18 »
Group: Administrator Hero Member Posts: 3981	OK here's the first draft Turns out although i can chain multiple chips for longer delay or phase shift i cannot chain for PWM which means i am stuck at using a single delay chip. Therefore the specs will be 0-255nS in 1nS steps using the DS1123-100 or 0-512nS in 2nS steps using the DS1123-200 Still need to add Fet Push/Pull 4A Driver ------------------------ 3 Digit 7 Seg Digital Monostable V1.png (26.14 kB, 1444x898 - viewed 780 times.)

Peterae	Re: 3 Digit 7 Seg Digital Monostable « Reply #5 on: 2014-09-10, 21:38:57 »
Group: Administrator Hero Member Posts: 3981	OK added FET driver ------------------------ 3 Digit 7 Seg Digital Monostable DM1.png (28.7 kB, 1534x904 - viewed 747 times.)

Peterae	Re: 3 Digit 7 Seg Digital Monostable « Reply #6 on: 2014-09-14, 18:43:39 »
Group: Administrator Hero Member Posts: 3981	OK final circuit and pcb I used smaller sma sockets for pulse Input & Output ------------------------ 3 Digit 7 Seg Digital Monostable monoschematic.png (29.34 kB, 1575x904 - viewed 701 times.) 3 Digit 7 Seg Digital Monostable monopcb.png (34.04 kB, 569x497 - viewed 678 times.)

Peterae	Re: 3 Digit 7 Seg Digital Monostable « Reply #7 on: 2014-09-27, 09:34:59 »
Group: Administrator Hero Member Posts: 3981	I have attached a zip of the Eaglecad files including Gerber & ordered 10 boards The PCB fabrication house that Les Banki uses ,their prices are dam amazing DigmonoGerbers Material: FR-4 Layers: 2 Board Thickness: 1.6mm Copper Thickness: 1/1 oz Surface Treatment: HASL Green Solder mask, White Silkscreen Dimension: 8.898.25cm 10 OFF $16.11 + P&P ------------------------ DigMonostable.zip (671.25 kB - downloaded 291 times.) « Last Edit: 2014-09-27, 10:52:11 by Peterae* »