@all
I had prepared a rather long post again about the AK30 but there is no point. After so many days on the bench experimenting with the AK30 circuit as provided by Akula, using two wind methods, gapped, ungapped, this circuit is just a straight line to load with a token pulse feature that does nothing. Resonance shmesonance, there is no point to producing resonance if the feed is being forced straight to load, what is the point? No point, no advantage, just heat.
The AK30 as he shows it in his schematic is a dud. This explains why there is no video ever done showing this device but it does not explain why Akula would not have come forward way before to explain that this schematic should not be taken as a functional guide. It is just a big joke man.
We will always have trouble with Akula designs because he is already sold out so whatever he says, does, explains, shows, purports, confirms, etc., etc., is just his way of trying to steer the world away from his biggest money maker (for him) and that is his yoke device. Once he sold that out, he probably was asked to create some duds to keep the public eye as far away from the yoke system as possible since they know, he had made some videos of the yoke before he licensed it away. That one fact for the money guys would be a valid deal breaker unless Akula could swing people away from the yoke. That is my gut feeling on the business side of things.
I think this is a great learning experience for us all. Instead of hastily moving forward to produce a drive circuit, first we all should ascertain if the main function principle and effect can be replicated in a more controlled manner using our regular bench equipment. Only once such preliminary tests show promise should we then blitz to make a circuit board, etc. My opinion and my future modus operandi. No more replicating a diagram if the base principle cannot be shown to work on the bench. I mean, why else do we have all these great pieces of equipment on our benches if not to cut through the fat of the matter.
Anyways, sorry for this bad news. It's bad for the AK30 but I cannot say anything else about the other devices he has shown except that I know now that all of them are just a calculated distraction (producing only peanut watts) from his main yoke device. Yes, he can say the yoke core lost its ability (bullshit), or any other excuse about the yoke not being of the right material (more bullshit), but that is all bull man. If you take a simple flyback ccore and measure the surface area of the contact points, then compare that surface area to that of a yoke, the yoke will win about 3 to 1. The yoke provides at least double or closer to triple the gap surface area and this must play into how the yoke halves can be used to transfer energy far better then a counteracting ecore.
Then it dawned on me to ask, besides the AK30, which Akula devices, shown to date, use an ecore? hmmmmmmmm. I wonder why?
So what else will be exported from Akulastan? Hmmmmmmm.
@GK
I'm back.
I just added a pdf to the ftp site on Tesla in case you never saw this one. It is so great to read his talks and there are so many great secrets in there when you read between the lines. The pdf was to big to attach here.
So I put it here;
http://purco.qc.ca/ftp/Inventors/Nikola-Tesla/General/The pdf that starts with Nikola Tesla - On his work................
wattsup
Author
Topic: Akula0083 30 watt self running generator. (Read 975320 times)
