@GK
Don't worry I will be with you after today.
@All
I am copying the answers from @Romero and my questions here;
romerouk Re: Muller Dynamo « Reply #3232 on: June 20, 2011, 09:43:42 PM »
Hi all,
many of you are not even trying to understand the reason I stopped posting more info about this build, try to go in my position and think what you will do. I only find few people who are really trying to understand and replicate this device.If you don't understand it, then is no point to continue, here or any other project, making a copy is not enough.
We have few people here that are really a goldmine for all, konehead, bolt, EMdevices, and few others, and I see many times that most of you are just ignoring their advices escpecially konehead who did try and built FE devices probably more than anyone here.
I have a great respect to konehead because I can see him thinking and building things same like me, not very sofisticated but simple and working and most important is that feeling that not everyone has.
Fake or not fake, this last 2 months showed to many of you a lot more understanding and knowledge than you have acumulated in a long time before, who can tell me that this is not true?
How many of you have experienced before this speed under load? How many of you have played before with coil shorting, capacitor shorting,... ?I am very happy that I brought up this discussions and now many people will start to understand it better.
Has anyone played with capacitors with 3 terminals? What about 4 terminals or 7??
Anyone tried to have 2 identical capacitors one charged and another empty.Now try to make a device that while is using first capacitor power it is charging the second one and end up with more in the second one.Possible??? oh yes it is.I have stated many times before, try easy and simple things before going big and before spending lost of money.I spend about £400-700 every month and i know most of you cannot afford that that's why keep it cheap and simple.
I wish you all the best,
Romero
*****************************************************************************
wattsup Re: Muller Dynamo « Reply #3242 on: Today at 12:40:29 AM »
So let me just resume this for a second. You deliberately faked both videos, you lied about the threats, you lied about not having your wheel anymore, you lied about the wheel doing what you said it does, you lied about knowing how it works because it does not and now, you want us to thank you for doing all this very generous effort of trickery just because since two months, "we are talking about this wheel".
So maybe if I put you in a prison cell, you will have to thank me because for the next two months you will be talking about how to use metal bars to create a secure environment. Or maybe you are willing to reimburse all those that will make a claim against you. Or maybe you just find all this very funny indeed. Or maybe you just love the idolizing. Or maybe you are so pissed off because your wheel did not work, that you are getting back at those that believe in such things. Either way, sir, you are a really sick puppy.
So what did we learn? Well. We learned that if you fake a video, people will eat it all up and end up treating you like a king.
You sir should be ashamed of yourself.
Now I have seen and read it all. I am simply disgusted.
wattsup
**************************************************************
romerouk Re: Muller Dynamo « Reply #3245 on: Today at 01:51:10 AM »
@wattsup
for long time I had a good impression about you and your posts and I tought you have good knowledge in understanding a real thing from the unreal.The fact that you cannot understand and succeed in making any OU device does not mean you are right.
If my device is a fake then prove it, if is not prove it again.
According to you we all should go to prison because we influence each other here, we replicate each other and so far nobody has achived any OU(actually some did), that means we all lie? What about Bedini? do you consider he is a liar? everyone here replicated some of his work.He was saying that Kromrey device can go up to 3.0 still nobody has reported that.
Well my friend, I can prove to you or anyone that I do have a working OU device, small but working, not the one everyone is trying to replicate now, that as I said milion times does not exist anymore. Is there any law that will force me or anyone to disclose our findings? I can prove it but I will not make public any of my work if I am forced to.We are all here doing what we do and we call it SHARING INFO nothing else.Most of us here found and discovered different things while experimenting and some info is kept and never released, should we call that hiding the truth?
I have hot published all my info to get something in return, nothing, how many time I said that.This was what I considered to be right and at the time I started to do first posts I had the intention to release all my findings, even if some of the things I did not understand how they worked.
It was enough to have a surprise visit and ruin everything.
What will you do after a special visit like that? I tell you, you will shit yourself and never touch anything.
I have 2 people here on the forum who knows all details about that and one of them saw the device working personally in my garden, we looked at it running for almost 3 hours.
People better keep quiet before someone will take this serious, we all know that the big guys are trying everything to stop all research towards any FE device.
Best regards,
Romero
*********************************************
romerouk Re: Muller Dynamo « Reply #3247 on: Today at 02:20:25 AM »
@wattsup
this is a picture from my next build.Even if it looks somehow like Muller it has nothing to do with that setup.I will post a video once it is completed but you will never know how it works even if it looks so simple.
Why do you think I am so stupid and spend lots of money to build more and more? Just for the show? well, this is a too expensive show without tickets, free, and I get nothing in return.
You have no ideea how expensive this is.
I am probably very stupid and have nothing to do with the money, just waste and keep people here entertained.
What do you suggest, should I stop the show?
Regards, Romero
(See image below)
*****************************************************************
wattsup Re: Muller Dynamo « Reply #3251 on: Today at 02:36:34 AM »
@Romerouk
The proof was already posted on this thread but Mr. Plengo removed them. You can see the whole thing here about proof.
http://www.overunityresearch.com/index.php?topic=1003.msg14812#msg14812If you know me, you will know I rarely give up until the reality is freed. I also do alot of bench work although because of this wheel, I have been doing less. I work with ether attraction now so for me, these mechanical wheels are play things. One day I will share it also but not till I know all I need to know. So I don't need any life lessons from anyone here. I am here for one reason only and that is to find the reality for those guys like @peterae that are with builds and others that are contemplating on spending some serious money on this.
So for me it is clearer then clear. Magic is only magic until you know how the trick was done.
So here are some easy specific questions that you can answer with a yes or no. I am not asking you to give up any secret that is supposed to be in the Romero wheel.
1) In your first video of the large unit, did you connect the battery terminals to the dc output rail of the generator coils? Yes or No?
2) In your second video where you remove the battery from the table top, you have two wires, a red and a black wire that are behind the unit going down inside the center opening of the table? Yes or No?
3) Referring to #2, do those two wires go to a battery under the table or to any other power supply? Yes or No
4) Do you agree that applying a battery to the dc output rails will bypass any other physics phenomena because the load will always be driven by the battery. The voltage may rise because the gen coils are producing some more output by maybe 3-4 volts. That is why you were reading 15.?? volts off the output rail. Yes or No?
5) Did you willingly create these videos to trick people into thinking the device was working in a way that it was not? Yes or No.
6) If #5 is no, why did you make those two videos and especially why did you do it in the way you did? Did you think that eventually we would not have found the tricks?
Your problem is simple. Instead of coming here and saying you made a wheel that does not work the way you want and you need help to find out what to do. I would have opened all avenues to help you. But you decided to play this big game.
Now if you want to come clean, this is the time and this is the place.
Just know that the link above cannot be erased by this moderator.
wattsup
PS: Just saw your photo of your new build. Expensive, don't worry I know what expensive is. I have done bigger then those. 12,000$ just for a custom built gear system. But hey, it's only money, right. lol
Now one more thing. A person that gets serious threats to stop what they are doing, and who is really scared of those threats, does not continue to make a new build. You see the problem we have with what you say and what you show is always contradictory. Just come clean and let's start from the beginning.
****************************************************
romerouk Re: Muller Dynamo « Reply #3255 on: Today at 03:25:17 AM »
First I can tell you that I am personally against deleting any posts, good or bad.In the end nobody can decide for us if it is good or bad.
Answers:
1) In your first video of the large unit, did you connect the battery terminals to the dc output rail of the generator coils? Yes or No? = Yes but not direct.
2) In your second video where you remove the battery from the table top, you have two wires, a red and a black wire that are behind the unit going down inside the center opening of the table? Yes or No?
= No, those wires are going to the bottom coil.
3) Referring to #2, do those two wires go to a battery under the table or to any other power supply? Yes or No = No
4) Do you agree that applying a battery to the dc output rails will bypass any other physics phenomena because the load will always be driven by the battery. The voltage may rise because the gen coils are producing some more output by maybe 3-4 volts. That is why you were reading 15.?? volts off the output rail. Yes or No? = The output coils separately were producing much more than 15 volts but were kept shunted by a procedure I wont describe.That helped the system to maintain the rpm and not feel the load up to a point.There was a point where from normal speed will turn all the way down if added even one more watt to the system
5) Did you willingly create these videos to trick people into thinking the device was working in a way that it was not? Yes or No. = No, I am not that kind of person you think I am, I have access to lots of servers, banks main servers, many important companies... If I am not trusted I will never walk in but maybe that is another thing.
6) If #5 is no, why did you make those two videos and especially why did you do it in the way you did? Did you think that eventually we would not have found the tricks? = Tricks? oh yes, there are many tricks but not that kind of tricks you think I did.
'A person that gets serious threats to stop what they are doing, and who is really scared of those threats, does not continue to make a new build.'
That you will not understand as you don't have the complete picture, if you will know, I am sure you will understand it and agree with me.I was interfering with others on the same project and we have a 'understanding'... if you look around you will probably find out soon who comes out with the same build and with a patent on it too.
Soon I am planning to invite some people from the forum for a live demontration.That will be enough to stop all this accusations. These people are very respectable here on the forum and most of you know them.
Don't wait to release any info on how will the new system work couse I wont.They can come over, video record for as long they want, can measure anything but without any o-scope,that will be forbiden.
I hope I answered all questions
Regards,
Romero
*****************************************************************
wattsup Re: Muller Dynamo « Reply #3261 on: Today at 06:01:21 AM »
@Romero
Thank you for your response.
Well we are not finished yet if you do not mind.
As per my previous questions.
1) Your answer "yes but not directly". I know that. You put the red output rail with the red wires from the drive circuit positives together, then through your ammeter then to battery positive. The negative from the output rail also goes directly to battery negative. Is that what you mean by "not directly". There is no difference in directly or not directly in this case. So your answer should be a simple Yes.
2) Your answer "No, those wires are going to the bottom coil." Yes we know about the orange and black wires from the top gen coil to the bottom gen coil. But what about the red and the black wires as shown below identified as Black Wire X and Red Wire X. These two wires are clearly going inside the center opening in the table. Please explain since these are the same two wires you used from the same unchanged fwbr locations to connect to the battery in your first video.
3) Since you now know we know about the Red and Black Wire Xs, would you like to change your answer for #3?
I don't think you understand how much information we have from your videos. May I suggest you visit the link I gave you above and scan through it, especially the images. You do not have to register there since all visitors are allowed to see.
Please take your time.
I understand very well about trust, patents, reputations, business, promises, etc. We all do and have these to one extent or another. What we do not do is make up videos and then have others build them who think the video is real. That in our usual book of definitions includes "not nice", "problematic" and many others qualifications depending on the location, dialect and moderator (hic hic).
I am trying to be as diplomatic as possible and appreciate your clarifications.
wattsup
PS: About your bigger unit, I think the plexiglass is too thin so I am sure you will not operate it in that way at full force. The coils look mean and waiting to bite their first piece of drag. Very smart with the two plate per coil design this will enable you to switch your coils around for testing. I would say you still need a second plate or is this a single plate design. Really nice. But you also know we have seen guys build many things that we do not have the answer to why they built it. When you think you have a good idea, you usually build it. It does not mean it will work, and, about that building instinct, we know. My problem is, right now I am asking myself, will you need a bigger hole to pass a fatter Wire X. And there in lies the problem. Trust, but verify.
(See 2nd image below is what I posted for Romero to see)
***********************************************************
romerouk Re: Muller Dynamo « Reply #3274 on: Today at 09:41:48 AM »
@wattsup
I have not seen the videos again but those 2 wires are going to the botom coil or from the lower coils to the controller.Again, I am so stupid to make a fake and go with the camera there to show it.
Where are those wires going in the suspended video?can you identify them?There are many other points that were recorded but people did't pay attention and ask why is that...
The new build what u see is just like a frame, the space in between the thin acrylic sheets will be filled making a big and solid coil holder, I need to wire all coils first as I will have no more access there after plastic filling.
Regards,
Romero
***********************************************************
Author
Topic: Romero and Wire X Dilemma (Read 103267 times)
