PopularFX
Home Help Search Login Register
Welcome,Guest. Please login or register.
OverUnity Research > DIY Test Equipment & Projects > DIY Oscillators > Oscillator with two seperate coils.
2024-11-26, 22:41:20
News: If you have a suggestion or need for a new board title, please PM the Admins.
Please remember to keep topics and posts of the FE or casual nature. :)

Pages: [1]
Author Topic: Oscillator with two seperate coils.  (Read 18885 times)
Topic Options img
img  Groundloop
Oscillator with two seperate coils. « on: 2012-02-28, 16:41:06 »
Sr. Member
****

Posts: 336
Hi All,

Can anybody explain why and how this oscillator works?

I must stress that there is no inductive coupling between L1 and L2.
L1 and L2 is far from each other and mounted 90 degrees to each other.
R1 has a high Ohm value, typical 1M Ohm.

GL.
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #1 on: 2012-02-28, 17:09:14 »
Sr. Member
****

Posts: 336
When I try to simulate this oscillator in http://www.falstad.com/circuit/
then it will not oscillate. Is this a bad simulator?

$ 1 5.0E-6 4.43302224444953 60 5.0 50
t 400 240 416 240 0 1 -8.394010612157514 0.6059893878354361 400.0
w 416 224 416 192 0
w 416 256 416 288 0
w 400 240 368 240 0
r 416 192 368 192 0 1000000.0
w 416 192 416 160 0
l 416 160 416 112 0 9.999999999999999E-5 -0.0033659982755748436
g 416 288 416 304 0
v 240 112 288 112 0 0 40.0 9.0 0.0 0.0 0.5
w 288 112 416 112 0
g 240 112 240 128 0
w 368 192 368 240 0
w 368 240 336 240 0
l 336 240 336 288 0 9.999999999999999E-5 -1.2933143714086734E-20
c 336 288 336 320 0 1.0E-10 0.6059893878354069
g 336 320 336 336 0
c 336 112 336 160 0 1.0E-5 9.0
g 336 160 336 176 0
w 336 112 416 112 0
o 6 64 0 35 0.625 0.00625 0 -1
o 13 64 0 35 0.00244140625 9.765625E-5 1 -1

GL.
   
img  poynt99
Re: Oscillator with two seperate coils. « Reply #2 on: 2012-02-28, 17:18:02 »

Group: Administrator
Hero Member
*****

Posts: 3217
It's not as complicated as it may seem...
Are the inductance values close to actual?

How long are the power leads?

What type of transistor is it?


---------------------------
"Some scientists claim that hydrogen, because it is so plentiful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." Frank Zappa
   
img  the_big_m_in_ok
Re: Oscillator with two seperate coils. « Reply #3 on: 2012-02-28, 17:29:17 »
Group: Guest
Quote from: poynt99 on 2012-02-28, 17:18:02
Are the inductance values close to actual?

How long are the power leads?

What type of transistor is it?
Just a thought?
If the coils are separated by a lengthy distance, capacitance on the wires in question might affect the whole circuit, yes?   Older computers from DOS days had prototype wires as short as possible for that reason and also potential electronic signal timing delay effects by the long distances as well.

--Lee
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #4 on: 2012-02-28, 17:45:33 »
Sr. Member
****

Posts: 336
.99,

I do not have the circuit anymore because I did build it some years ago.
But the values is close to what I did use at the time. The circuit was
soldered onto a small universal board. Transistor was BC546C.
The battery was a 9 volt battery and the wires was approx. 5cm long.

GL.
   
img  poynt99
Re: Oscillator with two seperate coils. « Reply #5 on: 2012-02-28, 17:55:49 »

Group: Administrator
Hero Member
*****

Posts: 3217
It's not as complicated as it may seem...
Were the inductors wound on two small ferrite toroids?

And I gather it doesn't work if one or the other inductors is absent?


---------------------------
"Some scientists claim that hydrogen, because it is so plentiful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." Frank Zappa
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #6 on: 2012-02-28, 18:18:25 »
Sr. Member
****

Posts: 336
Quote from: poynt99 on 2012-02-28, 17:55:49
Were the inductors wound on two small ferrite toroids?

And I gather it doesn't work if one or the other inductors is absent?

The inductors was ready bought 100uH inductors that looks like resistors.
No, both inductors must be there.

GL.
   
img  poynt99
Re: Oscillator with two seperate coils. « Reply #7 on: 2012-02-28, 18:30:11 »

Group: Administrator
Hero Member
*****

Posts: 3217
It's not as complicated as it may seem...
Do you think it would work with a BC546B? It is about half the gain of the BC546C, and the "B" is what I have in PSpice unfortunately.


---------------------------
"Some scientists claim that hydrogen, because it is so plentiful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." Frank Zappa
   
img  poynt99
Re: Oscillator with two seperate coils. « Reply #8 on: 2012-02-28, 18:42:01 »

Group: Administrator
Hero Member
*****

Posts: 3217
It's not as complicated as it may seem...
Do you remember what frequency it was oscillating at? Something around 1.5MHz?


---------------------------
"Some scientists claim that hydrogen, because it is so plentiful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." Frank Zappa
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #9 on: 2012-02-28, 18:47:42 »
Sr. Member
****

Posts: 336
.99,

The BC546B has half the Hfe as the BC546C.
I did not use the B so I do not know if it will oscillate or not.
Can you modify the Hfe in PSpice?
I do not remember the fundamental frequency now.

GL.
   
img  poynt99
Re: Oscillator with two seperate coils. « Reply #10 on: 2012-02-28, 18:54:12 »

Group: Administrator
Hero Member
*****

Posts: 3217
It's not as complicated as it may seem...
Yes I can.

I doubled the gain in the model, and it still did not oscillate.  :(

I tried increasing the cap to 470p, nogo. I reduced R1 to 10k, still a nogo.

Maybe you should rebuild it?  ;D


---------------------------
"Some scientists claim that hydrogen, because it is so plentiful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." Frank Zappa
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #11 on: 2012-02-28, 18:59:10 »
Sr. Member
****

Posts: 336
Quote from: poynt99 on 2012-02-28, 18:54:12
Yes I can.

I doubled the gain in the model, and it still did not oscillate.  :(

I tried increasing the cap to 470p, nogo. I reduced R1 to 10k, still a nogo.

Maybe you should rebuild it?  ;D

If I have more of the transistors then I can solder it together again.
I will look for the parts and see what I can find.

GL.
   
img  BEP
Re: Oscillator with two seperate coils. « Reply #12 on: 2012-02-28, 19:44:00 »
Group: Guest
Just a thought...

Was there some coupling action between the two inductors on the physical circuit?

I don't recall if Falstad has that function.
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #13 on: 2012-02-28, 20:30:51 »
Sr. Member
****

Posts: 336
Quote from: WaveWatcher on 2012-02-28, 19:44:00
Just a thought...

Was there some coupling action between the two inductors on the physical circuit?

I don't recall if Falstad has that function.

The two inductors was 20mm apart and orientated 90  degrees
to each other. So I think the inductance coupling was not there.

Gl.
   
img  poynt99
Re: Oscillator with two seperate coils. « Reply #14 on: 2012-02-28, 20:34:27 »

Group: Administrator
Hero Member
*****

Posts: 3217
It's not as complicated as it may seem...
According to GL's first post, he arranged them orthogonal to one another, so there should be minimal coupling.

However, I tried it with some coupling anyway, and guess what, it does oscillate now.

It needs only as little as 0.1 coupling factor. You could never cancel the coupling 100%, especially if they are built close to one another, so I think this is pretty good evidence that you still have some coupling there GL.

.99



---------------------------
"Some scientists claim that hydrogen, because it is so plentiful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." Frank Zappa
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #15 on: 2012-02-28, 20:45:26 »
Sr. Member
****

Posts: 336
Quote from: poynt99 on 2012-02-28, 20:34:27
According to GL's first post, he arranged them orthogonal to one another, so there should be minimal coupling.

However, I tried it with some coupling anyway, and guess what, it does oscillate now.

It needs only as little as 0.1 coupling factor. You could never cancel the coupling 100%, especially if they are built close to one another, so I think this is pretty good evidence that you still have some coupling there GL.

.99



.99,

You may be right. I'm soldering together a circuit now.

What I want to try is shielding the base inductor so that
no coupling can happen and see what goes.

Thanks for taking time to do the simulation.

GL.
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #16 on: 2012-02-28, 21:55:08 »
Sr. Member
****

Posts: 336
The circuit I soldered today did not oscillate at all.
I will change the two coils to 100uH tomorrow.
(Did not have the coils today.)

GL.
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #17 on: 2012-02-28, 22:23:09 »
Sr. Member
****

Posts: 336
When I added an antenna to the simulator then the oscillation starts.

$ 1 5.0E-6 4.43302224444953 60 5.0 50
t 400 240 416 240 0 1 -14.929013314318563 -9.506396041410826 400.0
w 416 224 416 192 0
w 416 256 416 288 0
w 400 240 368 240 0
r 416 192 368 192 0 1000000.0
w 416 192 416 160 0
l 416 160 416 112 0 9.999999999999999E-5 -15875.000553532427
g 416 288 416 304 0
v 240 112 288 112 0 0 40.0 9.0 0.0 0.0 0.5
w 288 112 416 112 0
g 240 112 240 128 0
w 368 192 368 240 0
w 368 240 336 240 0
l 336 240 336 288 0 9.999999999999999E-5 1.4929013364320398E-5
c 336 288 336 320 0 1.0E-10 -10.803797281957856
g 336 320 336 336 0
c 336 112 336 160 0 1.0E-5 9.0
g 336 160 336 176 0
w 336 112 416 112 0
A 416 192 544 192 0 0 40.0 5.0 0.0 0.0 0.5
o 6 64 0 35 40.0 26214.4 0 -1

GL.
   
img  EMdevices
Re: Oscillator with two seperate coils. « Reply #18 on: 2012-02-29, 12:02:00 »
Hero Member
*****

Posts: 805
This circuit is Dr Stifflers circuit minus the resonant coil connected to the collector.  To eliminate coupling you would have to go to extremes and orient the physical devices with high precision, but you don't want that.  However, it's not just magnetic coupling but capacitive coupling that played a part. We mentioned this to Stiffler in the beginning and now his circuits are on top of a conductive ground plane to enhance coupling.

EM
   
img  giantkiller
Re: Oscillator with two seperate coils. « Reply #19 on: 2012-02-29, 16:26:31 »

Group: Elite Experimentalist
Hero Member
*****

Posts: 1593
Frequency equals matter...


Buy me a drink
This is an interesting circuit.
I cannot get to Falstad's site at work to try this but I am thinking...

What if you make the antenna a large loop and parallel that with another loop that is hooked somewhere else in the circuit to transmit either in phase or out of phase to the antenna/collector loop? This makes it a [closed] feedback operation. I use [closed] loosely. We have all seen this type of unwanted operation before in places we did not want it. Well what if in this case and we do?

Oh wow! What if SM's collector is really a label to the antenna connected to the [collector of a transistor]?


---------------------------
http://purco.qc.ca/ftp/
   
img  BEP
Re: Oscillator with two seperate coils. « Reply #20 on: 2012-02-29, 16:29:06 »
Group: Guest
Quote from: EMdevices on 2012-02-29, 12:02:00
We mentioned this to Stiffler in the beginning and now his circuits are on top of a conductive ground plane to enhance coupling.

I didn't think many caught that  ;D

So, now he claims more free energy because he was provided correct information  :o
   
img  ion
Re: Oscillator with two seperate coils. « Reply #21 on: 2012-02-29, 16:42:06 »
Group: Elite
Hero Member
******

Posts: 3537
It's turtles all the way down
Some time ago (maybe 2 years) I built a similar circuit using an FET, and could not explain the oscillation at that time.

It worked even with shielded inductors some 3 or 4 feet distance from each other.

Orientation of the coils did not affect the oscillation.

I can only guess Miller Effect has something to do with the oscillation, or possibly some other capacitive coupling mechanism.


---------------------------
"Secrecy, secret societies and secret groups have always been repugnant to a free and open society"......John F Kennedy
   
img  EMdevices
Re: Oscillator with two seperate coils. « Reply #22 on: 2012-02-29, 21:42:03 »
Hero Member
*****

Posts: 805
I modeled the circuit and it easily oscillates, just need to play with the values.    I can get it to oscillate in bursts or constant, and here is a graph.    Based on the frequency, I can tell that the base curent is resonating through an even lower capacitance inside the transistor.

If we take in consideration the transistor model, we might find that this is nothing more then a Colpits oscillator!

EM
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #23 on: 2012-02-29, 22:24:59 »
Sr. Member
****

Posts: 336
Quote from: EMdevices on 2012-02-29, 21:42:03
I modeled the circuit and it easily oscillates, just need to play with the values.    I can get it to oscillate in bursts or constant, and here is a graph.    Based on the frequency, I can tell that the base curent is resonating through an even lower capacitance inside the transistor.

If we take in consideration the transistor model, we might find that this is nothing more then a Colpits oscillator!

EM

EM,

I think this oscillator is more like a Clapp oscillator.
The Clapp oscillator is a Colpitts oscillator that has
an additional capacitor placed in series with the inductor.
The resonant frequency is set by the LC tank circuit on
the base of the transistor.

GL.
   
img  Groundloop
Re: Oscillator with two seperate coils. « Reply #24 on: 2012-02-29, 22:27:06 »
Sr. Member
****

Posts: 336
Today I checked to see if the coupling between the two coils matter.
I did use a larger coil on the base to get a low coupling between the
two coils, and the oscillation did start.

EDIT 23.04.2013 I did not get the component values correct the first time so here is the correct version.

GL.
« Last Edit: 2013-04-23, 14:40:55 by Groundloop »
   
Pages: [1]
« previous next »


 

Home Help Search Login Register
Theme © PopularFX | Based on PFX Ideas! | Scripts from iScript4u 2024-11-26, 22:41:20