|
Ron shared this yesterday at David Bowling and Matt's thread
I thought I would repost it here
------------------------------------------------------------------
Snip
This is a repost from Norman Wootan on EV Gray.
But it does suggest a solid state model.
-------------------------------------------------------
I think I can see what you have been trying to tell us but not really telling us about isolating the load from the supply, this is an old idea that we talked about in the 1950s, but it does work. Let me explain:
Let's say we have a coil with both leads going to the common terminals of 2 two-way changeover switches. From the load terminals of the two-way changeover switches let's say that we connect the applied voltage supply on the left side terminals, and we connect the load to the right side terminals.
So in effect our coil leads are connected to the common terminals of the 2 two-way changeover switches, and then the coil can be switched on to the left side terminals to the applied voltage supply, to get a pulse, and then switched to the right side terminals to the load, to put the resulting collapsing field spike into the load.
Every time we switch the changeover switches to isolate the coil from the supply voltage, we supply a voltage spike to the load and by doing it many times a second we have a useful OU output to the load.
Here is something from my notes that I came across while investigating more about collapsing field technology some years ago. I don't know the name of the author or owner of this document.
CFT- (Collapsing Field Technology) - Updated 2008
In electrical systems, the term "back emf" actually refers to the equal and opposite force field accompanying the "forward emf", in any "symmetrical" electrical system.
In magnetic systems, the corresponding term is "forward and back mmf", rather than "forward and back emf".
All rotating motors actually turn themselves from the broken symmetry that is created inside them. The present engineers have been trained that they must pay to put extra energy into the system, just to break its symmetry. That of course is totally false. Otherwise, a rotating electron (with its continual spin) would not spin.
In a normal motor, we are trained to put in a coil (say, there in the back mmf region) and then we pay to put in a sudden surge of EM energy to that coil, so that it momentarily overrides (cancels) the back mmf force. In short, we momentarily make the system asymmetrical, so that its net back mmf is less than its forward mmf.
That means that now the motor retains at least some of its excess acceleration and excess angular momentum added to the flywheel and shaft in its previous acceleration (forward mmf) zone, but we are "paying" (the electric power grid) to have this occur.
Anyway, once that broken symmetry between forward and back mmfs is there, with the back mmf deliberately reduced to less than the forward mmf, the motor will self-rotate because of its own system asymmetry.
The fact that this effect has for over one hundred years been viewed as a problem to be designed out of electrical systems, perhaps because of greed, and no on had seriously considered it as a source of abundant free energy. Everyone knew it was there, but no one recognized its potential.
The standard, as manufactured, electrical generator systems can be modified inexpensively to the Over-Unity / Asymmetrical design concept.
By the addition of a second set of commutator brushes and / or the addition of a second slip ring assembly in the present electrical generators,
Over-Unity output, or asymmetrical rotation is achievable in hours.
These additional elements are to collect / scavenger, the collapsing fields (C.E.M.F.) of both the the armatures and field coils of present electrical generator sets.
Present design throws away this tremendous amount of electrical energy in the collapsing fields.(C.E.M.F.) You pay for it, why not get the utility of it?
Everyone who makes use of electrical circuits have always considered the collapsing field effect to be a nuisance because, when using a mechanical relay coil in an electronic circuit, it would cause a current to be pumped back into the circuit, creating havoc. One solution to the problem of C.E.M.F. was to install a diode across the coil leads and when the power was removed, the C.E.M.F. caused a current to flow which passed through the diode and to be dissipated as heat in the coil itself and not in the circuit.
On the armature / exciter element just install a second set of brushes or slip rings the exact amount behind behind the driver units, needed to collect the C.E.M.F., of the armature field collapse, to take it out of the system for additional output generator utility.
On the field coil system, just install a second set of brushes / slip rings the exact amount behind the original primary field coil system needed to collect the C.E.M.F. of the field coils collapsing fields for utility, when taken out of the unit as additional generator output utility.
The additional new C.E.M.F. outputs can easily be phased to the original output system load wiring.
These modifications more than doubled the generators output power at small modification cost / time, and no increase in operating costs.
This general design modification allows for most any currently manufactured electrical generator set to be an over-unity design; and with some additional external modifications a self-standing over-unity configuration can be obtained on most commercial electric generators by any competent electrical engineer. Why pay for fuel / power that you have available in your generator system already?
Again, just collect (scavenger) the C.E.M.F. of the armature and field coil"s collapses for far- over unity operation of these devices, and with external circuit additions, stand alone, fuelless electrical power is available to everyone, in the form of an off the shelf, self-substaining, asymmetrical, electrical generator.
The same modifications can be made in most manufactured motors as they can be made into generators easily.
Just scavage the armature and field coil collapses , control it with an external circuit, and you have a stand-alone over-unity electrical generator.
©©©©©©©©©©©©©©©©©©©©©©©©©©©©
Below is a stationary "motionless electromagntic generator design, based on the Alexander patent, that has been built experimentally; No far out 0 point vacuum explanations needed;
©©©©©©©©©©©©©©©©©©©©©©©©©©©
The best form would have no moving parts.
Looking at at the common transformer, and how it works, supplies the answer.
In any kind of transformer, electricity is transferred between the two coils by the magnetic field. When a coil is initially powered up or switched off, that coil creates a magnetic field which causes an initial rush of electricity, usually called a 'voltage spike.'
In conventional electronics, this voltage spike is suppressed to protect the other components from damage. In collapsing field technology (CFT), that voltage spike is harnessed, not suppressed.
If I take a DC signal generator power supply, and connect it to the primary of the transformer, I can make a generator of sorts.
I'll turn on the DC signal in the primary coil windings for just an instant, and then turn it off.
In the secondary there is a flux linkage following of the primary signal that is some 90% of he input power.
But we can recover also, the secondary's field collapse for an additional 90% of input power.
Thus, any transformer secondary will produce about 180% of the input power in this mode, with a gradually applied quarter sine or sawtooth wave shape. input DC signal.
But wait, we are throwing recoverable power away in the primary coil winding's field collapse. By applying the DC power input signal and then , when the input power is cut off, switch the primary winding's field collapse to the output also, the primary field collapse contributes at least another 90% to the output, for a grand total of about 270% gain, in this design.
The DC power signal must only take primary winding up and then let go (open ) at the top voltage.
Thus, the primary can be switched to the output to recover it's field collapse, that is in synchronozation with the secondary's field collapse.
Simple electronic switching can accomplish all of these functions, at little power usage and low cost.Therefore, the gain of a transformer over-unity generator would probably be about 250% output power to input power, and no mechanical motion needed.
Many old motors and generators could be adapted to the transformer design, given above.
The armature must be fixed permanently stationary and the air gap between armature and field coils filled with iron filings. The air gap iron filings, or iron powder filling is to make the best use of the primary's ( armature ) full flux power.
This makes for best transformer action and the highest power gain possible with this conversion design.
Cooling, through holes, can be left in the air gap if necessary in these units. The external switching electronic circuitry is the same as common transformer design, above.
All we have done is to turn the motor / generator into a reasonable transformer.
What is happening in this design is that for one"up"( power signal ) in the primary coil, we get the "up" ( field build ) in the secondary coil and the " downs" ( field collapses ) of both the secondary and primary coil as output power
Think of the primary coils as coupled "springs" and it will all be clear.
This transformer / generator design has been the nature of electromagnetic coils all the time--we just never saw it.
And if the unit is actuated 60 times a second, allowing for the counter-electromotive force field collapses, it makes the standard household 60Hz electrical generator.
This design concept is the natural last step after recovery of secondary collapses was introduced in generator designs.
The same gain principle and results could then be achieved in capacitor systems.
The charge (up ) cycle from the secondary plate and the two discharge cycles from both the secondary and primary plates would be the output power.
The basic external switching electronics is generally the same as in the transformer designs.
These designs are in the basic nature of energy storage / transfer elements---one input allows for the utility of the one input transfer and the two storage collapses or discharges as output power ( about 300% gain )
__________________
|
Author
Topic: Pierre's OU claim (Read 32209 times)
