Ethanehttps://en.wikipedia.org/wiki/EthaneEthane was first synthesised in 1834 by Michael Faraday, applying electrolysis of a potassium acetate solution. He mistook the hydrocarbon product of this reaction for methane, and did not investigate it further.[4] During the period 1847–1849, in an effort to vindicate the radical theory of organic chemistry, Hermann Kolbe and Edward Frankland produced ethane by the reductions of propionitrile (ethyl cyanide)[5] and ethyl iodide[6] with potassium metal, and, as did Faraday, by the electrolysis of aqueous acetates. They, however, mistook the product of these reactions for methyl radical, rather than the dimer of methyl, ethane. This error was corrected in 1864 by Carl Schorlemmer, who showed that the product of all these reactions was in fact ethane.[7]
The name ethane is derived from the IUPAC nomenclature of organic chemistry. "Eth-" refers to the presence of 2 carbon atoms, and "-ane" refers to the presence of a single bond between them.
In the laboratory, ethane may be conveniently prepared by Kolbe electrolysis. In this technique, an aqueous solution of an acetate salt is electrolysed. At the anode, acetate is oxidized to produce carbon dioxide and methyl radicals, and the highly reactive methyl radicals combine to produce ethane.
Acetic acidhttps://en.wikipedia.org/wiki/Acetic_acidAcetic acid /əˈsiːtɨk/, systematically named ethanoic acid /ˌɛθəˈnoʊɨk/, is an organic compound with the chemical formula CH3COOH (also written as CH3CO2H or C2H4O2). It is a colourless liquid that when undiluted is also called glacial acetic acid. Vinegar is roughly 3-9% acetic acid by volume, making acetic acid the main component of vinegar apart from water. Acetic acid has a distinctive sour taste and pungent smell. Besides its production as household vinegar, it is mainly produced as a precursor to polyvinylacetate and cellulose acetate. Although it is classified as a weak acid, concentrated acetic acid is corrosive and can attack the skin.
Acetic acid is the second simplest carboxylic acid (after formic acid) and is an important chemical reagent and industrial chemical, mainly used in the production of cellulose acetate for photographic film and polyvinyl acetate for wood glue, as well as synthetic fibers and fabrics. In households, diluted acetic acid is often used in descaling agents. In the food industry, acetic acid is used under the food additive code E260 as an acidity regulator and as a condiment. As a food additive it is approved for usage in many countries, including Canada,[8] the European Union,[9] the United States,[10] and Australia and New Zealand.[11]
The global demand of acetic acid is around 6.5 million tonnes per year (Mt/a), of which approximately 1.5 Mt/a is met by recycling; the remainder is manufactured from petrochemical feedstock.[12] As a chemical reagent, biological sources of acetic acid are of interest, but generally uncompetitive. Vinegar is dilute acetic acid, often produced by fermentation and subsequent oxidation of ethanol.
Propanehttps://en.wikipedia.org/wiki/PropanePropane (/ˈproʊpeɪn/) is a three-carbon alkane with the molecular formula C3H8, normally a gas, but compressible to a transportable liquid. A by-product of natural gas processing and petroleum refining, it is commonly used as a fuel for engines, oxy-gas torches, portable stoves, and residential central heating. Propane is one of a group of liquefied petroleum gases (LP gases). The others include butane, propylene, butadiene, butylene, isobutylene and mixtures thereof.
Propane containing too much propene (also called propylene) is not suited for most vehicle fuels. HD-5 is a specification that establishes a maximum concentration of 5% propene in propane. Propane and other LP gas specifications are established in ASTM D-1835.[5] All propane fuels include an odorant, almost always ethanethiol, so that people can easily smell the gas in case of a leak. Propane as HD-5 was originally intended for use as vehicle fuel. HD-5 is currently being used in all propane applications.
Turning methane into usable liquid fuelhttp://www.rdmag.com/news/2014/08/turning-methane-usable-liquid-fuelResearchers from the U.S. Dept. of Energy (DOE)’s Argonne National Laboratory and the Illinois Institute of Technology (IIT) were awarded $2 million over the course of two years to fund studies on hybrid fuel cells from the Advanced Research Projects Agency – Energy (ARPA-E).
ARPA-E, an agency within the DOE, was specially created to fund high-risk, high-reward energy research projects and was modeled after the similar defense agency, Defense Advanced Research Projects Agency, or DARPA. Argonne was one of 13 projects aimed at developing new fuel cell technology as part of ARPA-E’s Reliable Electricity Based on Electrochemical Systems (REBELS) program.
The research seeks to create a fuel cell that would both produce electricity and convert methane gas to ethane or ethylene that could then be converted to a liquid fuel or valuable chemicals. These cells could use natural gas—which is mostly made up of methane—directly.
With the advent of shale gas drilling techniques, methane is fairly abundant and frequently produced as a byproduct in drilling operations. Unfortunately, it is often burned off because it is expensive to transport in gas form, and few natural gas pipelines exist. Finding a less expensive way to instead turn that methane into liquid fuel—such as the hybrid fuel cell promises—could reduce waste and provide energy.
In the fuel cell, researchers plan to add a catalyst that helps make the reaction more efficient, breaking methane up and recombining it into hydrogen—which is then consumed by the fuel cell—and ethylene. The hope is that combining the steps will make the reaction more efficient.
“The ethylene is just a first step, a placeholder for proof-of-concept,” said Argonne chemical engineer Ted Krause, who is heading the project. “The overall goal is to produce liquid fuel from methane.”
Turning Carbon Dioxide and Methane into Liquid Fuelshttp://oilprice.com/Energy/Energy-General/Turning-Carbon-Dioxide-and-Methane-into-Liquid-Fuels.htmlLiviu M. Mirica, PhD, assistant professor of chemistry at Washington University in St. Louis may have found and is developing a novel metal catalyst that would be able to turn greenhouse gases like methane and carbon dioxide into liquid fuels without producing more carbon waste in the process.
Mirica describes a new metal complex that can combine methyl groups (CH3) in the presence of oxygen to produce ethane (CH3-CH3) in the Journal of the American Chemical Society.
So far the return to fuel from combustion products has been a losing proposition because making carbon dioxide into a fuel uses up more energy than combustion releases and produces more carbon dioxide than it reclaims. Mirica asserts, with some evidence now, it’s not impossible.
This could put a whole new take on petroleum and carbohydrate fuels, instead of being a polluting one-way street, hydrocarbon chemistry could circle back on itself and become a clean carbon-neutral cycle, even though still consuming some energy.
The new catalyst combines methyl groups (CH3) molecules in the presence of oxygen to produce ethane, the second step in the conversion of methane (CH4), the main component of natural gas, into a longer-chain hydrocarbon, or liquid fuel. Mirica’s team is currently tweaking the complex so that it will be perform the firs step in the methane-to-ethane conversion, too.
Hydrocarbons are so useful because they pack energy in their chemical bonds and release that energy when they are burned. Thus, they’re essentially convenient little energy packages. Reactions that release energy, however, are reluctant to reverse themselves and the more energy they release, the more reluctant they are to return.
So far there’s no way around this problem; if a reaction released energy both going forward and going backward, it could fuel a perpetual motion machine, which, of course, is an impossibility. But, it’s possible to make hydrocarbon combustion reactions run backward — either by brute force or by finesse.
The brute force way is to pump in energy. Old technology such as used to convert coal to oil worked only at high temperatures and pressures and much more energy was used to drive the reactions than was ultimately stored in synthetic oil they produced.
The finesse path is to devise a chemical compound, a catalyst that takes the reactants up an alternative, lower energy pathway to the reaction-produced products. In effect, instead of going straight up the energy hill, the reaction takes a more manageable — ideally the minimal-energy– series of switchbacks up to the top.
The background: Last year Mirica’s group was working with a palladium compound that they hoped could catalyze the splitting of water. “The catalyst we made for that reaction worked,” says Mirica, “but not as well as we hoped. But we noticed it was easily oxidized, even by the oxygen in air. This was our first hint that this might be an interesting system. So then we asked what else we could use it for.”
“One of our ideas was to use it to turn methane into ethane.” Methane, the main component of natural gas, is released sometimes in large amounts when an oil well is first tapped. Turning methane to ethane, says Mirica, could be the first step in a process of building longer-chain hydrocarbons such as butane and octane, which are liquid at convenient temperatures and pressures and so could easily be transported to distant users.
hhop gen 3 manipulates the specific gravity field to provide a gravitational energy input and an electrical system output, with hho (Hydrogen + Oxygen + Water Vapour) waste product ejected as gas exhaust on each cycle.
Everyman Standing Order 01: In the Face of Tyranny; Everybody Stands, Nobody Runs.
Everyman Standing Order 02: Everyman is Responsible for Energy and Security.
Everyman Standing Order 03: Everyman knows Timing is Critical in any Movement.
Author
Topic: hhop (Read 225034 times)
